Knowing where to add oil to your car is essential for maintaining engine health. Follow these five easy steps to ensure you’re adding lubricant correctly:
Step 1: Park on a Level Surface
Before adding petroleum, make sure your car is parked on a flat surface and the engine is off. This ensures accurate fluid level readings. If the engine has been running, let it cool for at least 10 minutes to avoid hot lubricant burns.
Step 2: Locate the Oil Cap
Pop the hood and find the petroleum cap, which is usually labeled with “Oil” or a fluid can symbol. It’s often found on top of the engine. Consult your owner’s manual if you’re having trouble locating it.
Step 3: Check the Oil Level
Pull out the dipstick, wipe it clean with a cloth, reinsert it fully, and then pull it out again to check the lubricant level. The fluid level should be between the “Min” and “Max” marks on the dipstick.
Step 4: Add the Oil
If the lubricant level is below the “Min” mark, slowly pour in the recommended fluid for your car type using a funnel to avoid spills. Add a little at a time, checking the dipstick regularly to avoid overfilling.
Step 5: Secure the Oil Cap and Close the Hood
Once the lubricant level is correct, put the petroleum cap back in place securely. Close the hood and start the engine for a few seconds to let the new fluid circulate. You’re all set!
